Water Based Epoxy 2K Grey 5 Litre

Epoxy 2K is a tough high build epoxy coating for walls and floors. Designed for use in warehouses, garages, balconies, cooling facilities and the food and pharmaceutical industry on substrates such as concrete, cement screed and cement render. When dry the product produces a tough, coloured, hard wearing dust free finish. It is also used as an adhesive primer on old epoxy resin coatings when applying new coatings.

Features

• Very Fast drying
• Primer and top coat in one
• Clean tools with water
• Solvent free
• Very easy to apply
• Good chemical resistance
• Slip resistant additive available
   

How to apply the paint

• Clean the floor by removing dust, oil or grease which will reduce the bond.
• Open the base and hardener components.
• Thoroughly mix the two together.
• Top up to 5 litres with clean water.
• Apply by brush or short pile roller to the floor.
• Clean tools with soap and water.
   

Normally 2 coats is advised for the best results. Allow to dry between coats.