- Product Water Based Epoxy 2K Grey 5 Litre successfully added to compare list
Delta Membranes
RRP:
£ 97.50
exc VAT
£ 114.56
inc VAT
Our Price:
£ 81.25
exc VAT
£ 95.47
inc VAT
Delta Aquaduct is a drainage channel which acts as a perimeter conduit bedded in at the floor/wall angle. Where appropriate, it can be laid under the slab to take off ground water to a sump or soak away, and reduce flotation pressures from baring on the slab.
Learn More
RRP:
£ 54.60
exc VAT
£ 64.16
inc VAT
Our Price:
£ 48.55
exc VAT
£ 57.05
inc VAT
A single sided jointing tape for sealing wall/floor joints, membrane joints, damaged membrane and reveal sections.
Learn More
RRP:
£ 30.00
exc VAT
£ 35.25
inc VAT
Our Price:
£ 24.00
exc VAT
£ 28.20
inc VAT
Used to relieve hydrostatic pressure. Installed below flooring membrane at the wall/floor junction.
Learn More
RRP:
£ 164.00
exc VAT
£ 192.70
inc VAT
Our Price:
£ 139.40
exc VAT
£ 163.80
inc VAT
Delta FM with its 3mm stud, is a low profile cavity drainage membrane ideal for specifications where floor height resrictions apply. The membrane is highly versatile and can also be used in conjunction with thermal insulation, sound insulation and most types of under floor heating.
Learn More
RRP:
£ 5.70
exc VAT
£ 6.70
inc VAT
Our Price:
£ 5.00
exc VAT
£ 5.88
inc VAT
Delta Silicone Mastic is used to seal lap joints on any meshed membranes. Can also be used above gound for sealing fixing plugs.
Learn More
RRP:
£ 245.00
exc VAT
£ 287.88
inc VAT
Our Price:
£ 169.60
exc VAT
£ 199.28
inc VAT
Delta MS 500 is used for both walls and floors in water ingress situations. It is supplied as a clear membrane to aid selection of good fixing points particularly when fixing to random stone or friable brickwork.
Learn More
RRP:
£ 325.00
exc VAT
£ 381.88
inc VAT
Our Price:
£ 220.25
exc VAT
£ 258.79
inc VAT
Designed primarily as a floor cavity membrane, it features a 20mm stud profile, giving it a drainage flow rate of 36'000 litres per hour for each square metre of membrane.
Learn More
RRP:
£ 36.00
exc VAT
£ 42.30
inc VAT
Our Price:
£ 28.80
exc VAT
£ 33.84
inc VAT
Delta Plugs are used to secure Delta System 500 membranes to building substrates and to fix battens or tracking systems. Prior to using Delta plugs, wrap a bead of Delta Rope around the head of the plug to form a compression seal. Delta Plugs are recommended when applying Delta MS500 or Delta PT Lath to vaulted arches.
Learn More
RRP:
£ 99.40
exc VAT
£ 116.80
inc VAT
Our Price:
£ 88.25
exc VAT
£ 103.69
inc VAT
Delta PT Lath should be chosen as the wall membrane if the desired finish is to be dot and dab plasterboard or a direct finish such as render, plaster or lime mortar.
Learn More
RRP:
£ 290.00
exc VAT
£ 340.75
inc VAT
Our Price:
£ 217.78
exc VAT
£ 255.89
inc VAT
Delta PT Lath should be chosen as the wall membrane if the desired finish is to be dot and dab plasterboard or a direct finish such as render, plaster or lime mortar.
Learn More
Delta Membranes have a complete range of waterproofing products which are used to solve many of today’s damproofing and waterproofing problems. Delta Membranes can be used internally or externally in new and old buildings. Delta Membranes easily deal with water ingress situations ranging from above ground damproofing, where simple dampness and salt patches are prevalent, to basements that are likely to flood or have already flooded in the past. Delta Membranes also produce membranes for more diverse applications to include barn conversions, turf covered roofs, tunnel linings and Delta Membranes can even be used as a barrier against radon gas. (Please consult technical guidance notes).
The main component of the waterproofing system is the Delta Membranes themselves. Delta Membranes are manufactured from high density polyethylene which is thermally and alkaline stabilised. The stud heights of the various Delta Membranes vary from 3mm for Delta FM, 8mm for Delta MS 500 and Delta PT to 20mm for Delta MS20. All of the Delta Membranes create different cavity volumes between 2.1 and 10 litres of space. This space is known as the ‘air gap’ or ‘cavity drained’ in wet situations.
The different Delta Membranes:
Delta MS500 – This membrane is used for floors and walls, supplied in 2.4m x 20m rolls. Delta MS500 is a clear membrane designed to aid the selection of good fixing points in more difficult applications for example random stonework and friable brickwork. Delta MS500 is fixed with either a Delta Plug sealed with Delta Rope or the Delta Quick-Seal Plug.
Delta PT Lath – This membrane has a mesh thermally welded to the face of the membrane designed to allow for direct render 1.1.6 (cement/lime/sand), or plasters: Tarmac Whitewall, Carlite Bonding, or dab fixed plasterboard. Delta PT Lath is fixed with either the Delta PT Plug (with or without seals), Delta Plug sealed with Delta rope or the Delta Quick-Seal Plug. Mesh membranes require at least 15 plugs per m² internally.
Delta FM – This Delta membrane is a low profile membrane designed primarily as a floor membrane.
Delta Membranes MS20 – This Delta Membrane has large 20mm studs designed where extra drainage capacity is required. Delta MS20 is supplied in 2m x 20m rolls and is generally used on the floor but can be used on the walls in extreme water ingress situations.
MY CART
